How do you get through an IAPP exam case study without running out of time?
Don't read every word of the case study first. Do a quick pre-read to find where the case is set, who the actors are, and what has gone wrong. Then read the first question and its answer choices, skim back to the section that matters, and read only that part word for word. Repeat for each question.
If you're preparing for your first IAPP exam, it helps to know what the questions look like.
The IAPP candidate handbook says you may be asked to read a scenario and then answer questions about it. In practice, you'll see three lengths of question. Case studies are the longest, and they're where I see students struggle most.
What types of questions are on an IAPP exam?
Here's how I break it down for my students. The percentages are my own rough estimates, not official IAPP figures.
| Question type | Length | Time to plan for | Share of the exam (my estimate) |
|---|---|---|---|
| Short recall | Half a sentence to one sentence | 20 to 30 seconds | About 20% |
| Self-contained scenario | Three to five sentences, one question | 60 to 90 seconds | About 50% |
| Case study | Three to five substantial paragraphs, three to five questions | 5 to 10 minutes for the set | About 30% |
Short recall questions are simple: you know the answer or you don't. Self-contained scenarios take longer because you have to track the context.
Case studies are different. One long passage feeds several questions, and the facts for question three may sit in a different paragraph from the facts for question one.
Why do case studies eat up so much time?
The time math is the problem.
According to the IAPP certification FAQs, the AIGP has 100 questions in 2.75 hours, while the CIPP/E and CIPP/US have 90 questions in 2.5 hours, as do the CIPM and CIPT. Either way, that works out to a little over a minute and a half per question on average.
A case study can take 5 to 10 minutes. If you read every word of the case for each of its four or five questions, you're reading three to five long paragraphs four or five times. The clock wins.
So don't start by reading every word.
What is the case study pre-read?
Start with a pre-read. Scan the case study quickly and pull out three things.
Jurisdiction. Is this U.S. law, EU law, or a multi-jurisdictional organization?
Roles. Who are the actors? If you're taking the AIGP, is the organization a provider, a deployer or an importer? Is more than one operator involved?
The conflict. What's going on? Maybe it's a data transfer, an AI system that's malfunctioning, or a program that's just getting stood up. Maybe several teams (privacy, AI governance, security) are trying to coordinate.
A shorthand if it helps: where, who and what's wrong.
You aren't trying to memorize the case. You're loading context.
How do you answer each case study question?
Once the pre-read is done, work one question at a time.
- Go to the first question and read it carefully. What exactly is it asking?
- Read the answer choices, too.
- Go back to the case study. Because you did the pre-read, you already have a rough idea where the relevant facts live. Skim to that section.
- Read that section word for word.
- Choose the answer the text supports, then move to the next question and repeat.
At step 4 you're looking for more than the best answer. You're looking for evidence in the text that points to it.
Attorneys, this will feel familiar. It's how you learned to work a fact pattern: read the call of the question first, then go back to the facts.
You'll reread paragraphs. You won't reread the whole case four or five times.
A quick worked example
Say the case describes a European retailer that buys an AI hiring tool from a U.S. vendor, rolls it out across offices in three EU countries, and then hears complaints that the tool screens out older applicants.
Your pre-read takes well under a minute:
- Where: EU, multiple member states.
- Who: the U.S. vendor built the tool, and the retailer is using it.
- What's wrong: a possible bias problem in a hiring system.
The first question asks what the retailer should do first. You read the choices, skim straight to the paragraph about the complaints, and read it closely. You skip the vendor's background, because the pre-read told you it's context for other questions.
The pre-read is a map. Each question tells you where on the map to look.
How this shows up on each IAPP exam
The pre-read works on every exam, but the emphasis shifts.
- AIGP: roles carry a lot of weight. Whether an organization is a provider or a deployer can point to very different answers.
- CIPP/E: jurisdiction and roles often mean controller versus processor, and whether a transfer outside the EU is in play.
- CIPP/US: jurisdiction can mean federal versus state law, or which sector law applies.
- CIPM: the conflict is often a program problem, like a new privacy program being stood up or teams that aren't coordinating.
Keep your pace in mind
One more thing worth knowing. The handbook says the exam is split into two halves at the 15-minute break, each with half the questions and half the time. Once you submit the first half, you can't go back to it.
So a long case study in the first half can't borrow time from the second. My post on IAPP exam time management goes deeper on pacing.
Five to ten minutes is enough time to work a case study. It isn't enough time to read one five times.
Frequently asked questions
How many case study questions are on an IAPP exam?
The IAPP doesn't publish a count of case study questions. The handbook only says you may be asked to read a scenario and answer questions about it. In my experience, questions tied to longer case studies make up roughly 30% of the exam, usually in sets of three to five.
Should I read the questions before the case study?
I recommend a quick pre-read of the case first, then reading each question before you go back to the text in detail. The pre-read tells you where things are. The question tells you what to look for.
How long should I spend on an IAPP case study?
Plan on 5 to 10 minutes for the whole set of questions tied to one case. If you're well past that, make your best choice and move on. Spending 15 minutes on one case costs you questions you could have answered quickly.
Can I go back to a case study question later?
Within each half of the exam, yes. The handbook says you can use forward and back arrows to move between questions. Once you submit the first half at the break, you can't return to it.
Keep reading
- IAPP exam time management: how to pace yourself across both halves of the exam.
- Read IAPP exam questions carefully: the two-part framework for slowing down on every word.
- Layered analysis for IAPP exam questions: how to peel back a long scenario one layer at a time.
This tip comes from my free IAPP Exam Secrets course, where I walk through the rest of the strategies I use on case studies and every other question type. It costs nothing, and you can start whenever it suits you.
Preparing for an IAPP Exam?

- Free
- 53 minutes
- 10 techniques
